“We were able to try the liners for the Big Ben Tray and the Wide Boy Bucket. We had one of each to use. ... Read More It was a little difficult getting the liner into place for both (I am sure this would get easier with more use and experience with the product). They were very tight around the top lip of the tray/bucket and we didn\\\'t want to rip the liners since we only had one of each to try. Once we had the liners in place, we were a little disappointed with the fit and the roller nap seemed to slide on the plastic when loading. \r\n\r\nWhen it came time to clean out the tray and bucket, the liners definitely worked well. It was super easy to pull out the liner, cut a hole in it for the remaining paint to go back into the paint can and throw out the liner. It saved a lot of time/effort. \r\n\r\nWe would definitely have to try these more times than once to get a good feel for them. I feel we may not have had the best fit since it was our first time installing them on a tray or bucket, thus the issue of the roller nap slipping might not be a real issue. We use and reuse the rigid plastic liners for our 9\\\" deep well trays multiple times, so the cost per use with them is probably pennies or a nickel per use. These Quickn\\\' Clean liners only give one use, so the cost per use is much higher. Ultimately they do save time, so our use would probably be based on the type of job we were on.”
Less
“We had the opportunity to try the Quickn\\\'Clean liners multiple times (rather then only once with are p... Read Morerevious review). We find it takes our company multiple uses of a new product in order to get comfortable with it and have it become normal everyday use. It does take time and effort to form a new habit and we are very glad we gave these liners a second look. We now use them everyday! ”
Less
Mike, thank you for taking the time to review our products. Yes, you are right there is a small learning curve with our product and we have included loading instructions on all our packaging to help this process along. The liners are made of a special blend that is made to stretch without ripping around the upper edge of the bucket. With a little “on the job” use you’ll also find the rollers load properly. With continued use you might also realize the saving as our liners cut clean up time in less than a minute and without water. You may contact me on our website to request additional samples to try.
Paintfly, thanks for your inquiry. We sell the liners for the wideboy bucket which accepts 18″ rollers and the big ben tray which also accepts 18″ rollers. You may purchase these products online at valleyproproducts.com.
Tired of cleaning your buckets out? Try these bucket liners from Valley Pro Products. Let us know what you think by leaving a review here.
Mike, thank you for taking the time to review our products. Yes, you are right there is a small learning curve with our product and we have included loading instructions on all our packaging to help this process along. The liners are made of a special blend that is made to stretch without ripping around the upper edge of the bucket. With a little “on the job” use you’ll also find the rollers load properly. With continued use you might also realize the saving as our liners cut clean up time in less than a minute and without water. You may contact me on our website to request additional samples to try.
Thanks!
Sal
Valley Pro Products
Thanks for your comments Sal. I will definitely contact you and request some additional samples to try again.
Mike
DBK Painting
Thanks Mike for the follow up! It is very true that a product needs to be used more than once to really know if it works, appreciate your input!
Paintfly, thanks for your inquiry. We sell the liners for the wideboy bucket which accepts 18″ rollers and the big ben tray which also accepts 18″ rollers. You may purchase these products online at valleyproproducts.com.
Thanks!
Sal
Hi, just wondering if the Quick N’ Clean liners can be used with epoxy floor coatings (clear or colors)??
Yes, they will hold up to two part and solvent based epoxy.